You are one lucky biker! You have a beautiful BMW motorcycle that you want to ride all over the country. But you need to make sure you take care of it so it stays in good shape for years to come. You have an idea of what you need to do to care for your favorite piece of BMW off road bike, but where do you start? Let’s look at some of the basic BMW motorcycle specs and care tips:
The stock suspension setup for the front forks on a new bike is typically pretty decent. They work pretty well, and the material used to line them up is strong but flexible. When you need to change them out though, it’s easy enough with the motorcycle specs section of the BMW website. Here you can find out exactly how to swap out your suspension components so that your suspension has a long life and your new bike looks great for years to come.
Your front shocks, or struts, need to be inspected and changed whenever necessary. Front shocks have to be lowered as the bike ages, but this isn’t usually a huge problem because the suspension lowers itself naturally as the bike ages anyway. BMW shocks are made of aluminum, and they have to be replaced from time to time as well. There’s nothing wrong with having your existing front suspensions checked periodically by a professional to ensure that everything is working properly.
Your front motor has to be checked as well. It might not be necessary for you to replace it, but you should keep an eye on it just the same. A dirty motor is less likely to work properly. You should also check the oil filter on your motorcycle and change them as necessary. The motorcycle oil filter is located under the bottom rear fender on most BMWs.
Riding BMW Off Road
You can remove your braun tools from the bike to inspect it for wear and tear. If your braun tools are in good condition, then you should not need to make changes to them. However, some bmw models require that you change the nuts and washers in the tool after every 500 miles or so. The purpose of this is to prevent the washer from stripping away before the nuts can be changed. Changing your braun tools is a fairly simple process, but you should make sure that they all work properly so that the bike is as safe as possible when on the road.
Your muffler needs to be inspected often, particularly if you ride on bumpy terrain regularly. The resonators must be cleaned often, and the cones and pipes must be checked for cracks and damage. Any loose hardware, such as screws or washers, must be replaced immediately. It is important to make sure that your muffler matches your bmw off road kit. If they do not match, then the sound of your bmw off road motor will be different from the sound of a stock muffler. If you install the wrong muffler, it will not only take away the pleasure of riding your bmw off road bike, it can also be quite dangerous.
Your suspension system is another important component for your off roading experience. The front and rear shocks need to be set correctly for the type of surface you will be driving on. Make sure that you have your bike serviced often enough to check for leaks. Also, your engine and battery can both develop problems, especially if you use off road gas. You need to lubricate the engine and your battery from time to time as well as checking for leaks.
In the End
The suspension arms, shock towers, and tires need to be properly maintained as well. If you do not take care of these components on your bike, it will not last long. These parts wear out in all types of conditions and are prone to damage. The best way to maintain your suspension is to tune the springs and shock towers, as well as changing the tires as needed. Keep your engine tuned up and make sure that you service your tires as needed as well to keep your BMW off road.